File Size
Pistol3.pdf 176.48KB Download

Lee Precision Carbide 3-Die Set .38 Special

Lee Precision Carbide .38 Special, .357 Magnum 3-Die Pistol Set uses a solid carbide insert ground to a special contour that does not leave the objectional belt mark on the cases, common to the ordinary carbide dies. A Carbide Full Length Sizing Die is a must if you are reloading for more than one firearm or reloading cases that were fired in other firearms. No case lube is needed, and you don't have to clean your cases.

Taper crimp dies are used to correct problems caused by the improper expanding plug design or adjustment. They distort the bullet shank and reduce accuracy. The Powder Thru Expanding Die charges the case while expanding the mouth. All of the flare is removed with the Bullet Seating Die. Thus eliminating the need for a tapered crimp die.

Includes:

  • Carbide Full Length Sizing Die (shown in image at the right)Lee Precision Carbide Sizing Die Cutaway
  • Bullet Seating Die
  • Powder Thru Expanding Die
  • Universal Shell Holder
  • Powder Dipper
  • Instructions
  • Load Data

NOTES:

  • No case Lube needed
  • The .38 Special die set can also be used to reload .357 Magnum by backing out the Powder Thru Expander Die, the Bullet Seating Die, and Crimping Die about 2 turns to compensate for the longer 357 case. Load data for .357 Magnum is available in Lee Precision Modern Reloading 2nd Edition

 IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

  • DO NOT USE more powder than recommended
  • DO NOT USE a heavier bullet than recommended
  • DO NOT SEAT the bullet deeper than normal
  • DO NOT USE magnum primers unless using a slow burning ball powder
  • Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures
  • High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures


WARNING:

Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.


Write a review

Note: HTML is not translated!
    Bad           Good

LEE Carbide reloading dies .38 Special

  • 499.00 Kr

  • Ex Tax: 399.20 Kr